Passer den til din motorcykel?
Slå op med nummerplade eller stelnummer, eller vælg model.
Denne del passer på din MC · Position:
Denne del passer ikke til din MC. Se dele der passer
Passer til de fleste motorcykler
Ikke modelspecifik. Tjek mål og specifikationer i beskrivelsen før du bestiller.
Vælges efter størrelse, ikke model
Størrelsen står på dækkets side, fx 120/70 ZR17, og i registreringsattesten.
Tjekker pasform…
Pasformstjek ikke tilgængeligt
Andrews Twin Cam Camshafts with Gear Drive – Engine
Produktinfo
- Varenummer
- 232518
- Placering
After two years of testing and development, Andrews Products is offering cams for S&S gear drives for Twin Cam. The primary advantage is that the gear drives use less engine power to operate than stock chain drives. Dynamometer comparisons show gains of 4 horsepower over similar engines with chain driven cams. When less power is needed to turn the camshafts, more power gets to the rear wheel. For all out drag motors, there is also an additional advantage with gear drive cams. Simply stated, higher lift cams can be used with the gear drive setup. The reason for this requires some explanation. With chain drive 88 cams, valve lifts of .600 or higher will result in interference between front and rear cam lobes. With the gear drive cams, lobe top angles are different so lobe to lobe interference cannot occur. These cams are for use with S&S cam gear drive kit (ZPN721948).
67G GRIND, Performance cams for 95 to 107 or even more Cubic Inches and 10.0 to 10.8 compression ratio and high-flow head set up (2600-6500+ RPM).
Camshafts TW67G bolt-in TC99-06 ex FXD06
- Category: Cams for Twin Cam
Fri fragt til GLS pakkeshop eller pakkeboks ved køb over 749 kr.
Levering til døren med GLS koster 59 kr.
Vi sender din ordre hurtigst muligt. Ordrer pakkes som regel inden for 24 timer på hverdage.
Du har 14 dages returret. Læs mere
4,8 ud af 5 på TrustpilotLæs vores anmeldelser →
Certificeret e-mærket webshop
