Passer den til din motorcykel?
Slå op med nummerplade eller stelnummer, eller vælg model.
Denne del passer på din MC · Position:
Denne del passer ikke til din MC. Se dele der passer
Passer til de fleste motorcykler
Ikke modelspecifik. Tjek mål og specifikationer i beskrivelsen før du bestiller.
Vælges efter størrelse, ikke model
Størrelsen står på dækkets side, fx 120/70 ZR17, og i registreringsattesten.
Tjekker pasform…
Pasformstjek ikke tilgængeligt
Feuling Twin Cam Reaper 630 Conversion Cam Set - .630" Lift - 1018
Produktinfo
- Varenummer
- MSH-707505
- Placering
Used to convert 99-06 Twin Cams, with the stock mechanical spring adjusted chain tensioners, to 06-17 style hydraulic chain tensioners that work on engine oil pressure. This 06-17 hydraulic system is better and used in all late model Twin Cams. 630" intake & exhaust valve lift. Very High performance cam. Offers vicious performance gains for large engines (2.500 -6.900 RPM). Tuning required. High performance valve springs, pushrods, lifters, and clutch required. Fitment notes: - Additional parts are required. Conversion camshafts for ’99-’06 Twin Cam engines use 99-06 inner cam journals with the 07-17 outer cam journals allowing the use of the stock 07-17 cam plates, oil pump, hydraulic chain tensioners and chain drive sprockets. - This conversion camshaft will not fit a conversion cam plate. Stock style 07-16 style cam plate is required. - See 'Additional parts required for installation' below. These are not available through Motorcycle Storehouse, unless the MCS part number is mentioned. - Required components for 99-06 to 06-17 conversion camshaft kits: Feuling, OE+ hydraulic cam chain tensioner conversion kit 707402 99-00 Twin Cam; 2001 FLT or 707403 01-06 Twin Cam (excl. 2001 FLT; 2006 Dyna). Installing conversion camshafts in 99-06 style Twin Cam engines, require use a 07-17 style cam plate and oil pump. Therefore also requires following parts: 707246 Outer chain. Repl. 25675-06. 707245 Inner chain. Repl. 25683-06. 921614 Outer crank sprocket 17 tooth. Repl. 25673-06. 921615 Outer cam sprocket 34 tooth. Repl. 25728-06. 948489 Outer hydraulic tensioner unit. Repl. 39968-06. 948490 Inner hydraulic tensioner unit. Repl. 39969-06. Feuling spacer kit: Kit included one thrust washer and one of each size cam alignment spacers. 25729-06 Thrust washer front cam .100". 25731-06 Spacer .110" cam alignment. Use as required. 25734-06 Spacer .120" cam alignment. Use as required. 25736-06 Spacer .130" cam alignment. Use as required. 25737-06 Spacer .140" cam alignment. Use as required. 25738-06 Spacer .150" cam alignment. Use as required. Note: Installation requires qty. 2 of these spacers. Note: Correct spacer thickness is a must for proper sprocket alignment. 707244 07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring; 99-06 Twin Cam (excl. 2006 Dyna) with 99-06 to 06-17 camshaft conversion kit. 99-01 Twin Cam with Magneti Marelli ignition: 99-01 engines with Magneti Marelli ignition require the use of Andrews sprocket 503707 in replacement of the stock 34 tooth outer cam drive sprocket 25728-06. 503707 99-01 TCA/B. Andrews with ignition trigger ring
- Category: Cams
- Manufacturer part number: 1018
Fri fragt til GLS pakkeshop eller pakkeboks ved køb over 749 kr.
Levering til døren med GLS koster 59 kr.
Vi sender din ordre hurtigst muligt. Ordrer pakkes som regel inden for 24 timer på hverdage.
Du har 14 dages returret. Læs mere
4,8 ud af 5 på TrustpilotLæs vores anmeldelser →
Certificeret e-mærket webshop
